Model Number: EPA1205-1
Brand Name: Everpower
Key Specifications/Special Features:
Features: Microprocessor control (CPU). 4-stage automatic charging: This is a fully automatic battery charger with 4 charge stages. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
4-stage charging is a very comprehensive and accurate charging process that gives your battery longer life and better performance compared to using traditional chargers.
Switchmode technology: yes
Cooling: natural convection
Features: Input voltage:100-240VAC, 50-60Hz
Rated output: 13.8V DC, 5A
The 4stages are: desulphation, bulk, absorptionand float.
Battery range: 15-100Ah
Thermal protect: 65'C+/-5'C
Efficiency: app. 85%.
Dimension (LxWxH): 180x70x55mm
Weight: 490g
Safety protections:
- Over voltage protection
- Short circuit protection
- Polarity error protection
- Over power protection
4-stages:1. Desulphation
The Desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
2. Bulk (constant current)
Bulk mode charges the battery at the maximum rate (constant current) putting a large amount of power into the battery in a short amount of time. This stage will charge the battery to approximately 80%, until the voltage reaches 14.5 volts for 12V charger
3. Absorption (constant voltage)
The charge rate slows down so the battery can absorb more power and reach 100% charge. The voltage remains at a constant 14.5 volts for 12V charger while the current is gradually reduced until no more power can be added without over-charging the battery.
4. Float
The float stage maintains the battery at 100% charge without overcharging or damaging the battery. This means the charger can be left connected to the battery indefinitely.
When the charger is charging, the battery capacity from25% to100% indicated by 4LEDs:
- Power on: red LED
- 4 LEDs: green LED (indicate the battery capacity 25% to 100%)
Use |
Standard Lead acid Battery |
Type |
Electric |
Place of origin |
Guangdong, China (Mainland) |
Input voltage |
AC 100-240V |
Output voltage |
13.8V |
Output current |
5A |
Outlet |
Defined by user |
Protection |
OVP/OCP/Short circuit |
Charge mode |
Auto 4 stages by MCU controlled |
Packaging |
Plain box |