Buttweld Elbow

Technology ：Mandrel forming

Size：seamless 1/2"-24"（DN15-DN600)
Welded 1/2”-48”(DN15-DN1200)

Standard：ASME B16.9,DIN 2605,JIS B2313,GB/T12459,GB/T13401,SH3408,SH3409,HG/T21635,HG/T21631MSS SP-43
Thickness：SCH5S-SCH160

Material：317/L、304/L、316/L 、310/S 、309/S、347/H 、321/321H、904/L 、S32750/F53/SAF2507、
S32205/F60 S31803/F51、S32760/F55 

1. Stainless steel weld elbows the pipe mouth of the elbow of the product is provided with a lining, the lining part is located in the pipe mouth, and the wide mouth wall is fixed and connected, the lining part is located outside the pipe mouth, the product is located in the pipe mouth outside the lining is set with a cut.When the stainless steel elbow is connected with the stainless steel pipe, it is easy to butt and install, which can eliminate the tension generated by the pipe connection and has a strong anti-deformation ability.Welding stainless steel elbow manufacturers

2.Stainless steel weld elbows, related to the field of architectural decoration, its technical points are: including the elbow body, the elbow body of the product includes a curved bending section and a straight section connected at both ends of the bending section, and also includes an arc bending resistance part, both ends of the bending section of the product are connected through the bending part, and the two forms hollow out.By setting the bending resistance part, the bending resistance of the elbow is enhanced, and the service life of the elbow is also increased.Welding stainless steel elbow manufacturers

3. Stainless steel pipe fitting belongs to a kind of pipe fitting, it is made of stainless steel material so called stainless steel pipe fitting, it includes: stainless steel elbow, stainless steel tee, stainless steel tee, stainless steel reducer, stainless steel pipe cap and so on.Welding stainless steel elbow manufacturers

Elbow is a kind of pipe fitting commonly used in plumbing installation. It is used to connect the pipe at the bend and change the direction of the pipe.

Other names: 90° bend, right Angle bend, love bend, stamping bend, pressing bend, mechanism bend, welding bend, etc.

Purpose: connect two pipes with the same or different nominal sizes to make the pipe turn at 90°, 45°, 180° and various degrees.

Bending radius less than or equal to 1.5 times of the pipe diameter belongs to the elbow, greater than 1.5 times of the pipe diameter belongs to the elbow.

http://www.mlfitting.com/